FT-100系列振實密度測試儀
FT-100 Series Tap density tester
1. 概述：Overview
具有設定振次和時間兩種測量方式，設計符合人體工學，操作簡單.符合USP（美國藥典）、BP （英國藥典）和EP（歐洲藥典）的規范要求及GB/T5162-2006/ISO3953:1993（金屬粉末 振實密度的測定），儀器含蓋國標GB/T 5162-2006/ISO3953:1993中的各項指標。
With set vibration times and time two measurement methods, The design accord with human body engineering, the operation is simple. Meet specification requirements of USP (the United States pharmacopoeia), BP (British pharmacopoeia) and EP (European pharmacopoeia) and GB/T 5162-5162 / ISO3953:1993 (metal powder the determination of tap density), This instrument covers all the indexes in national standard GB/T 5162-2006 / ISO3953:1993
二、適用范圍：Scope of application
適用于非金屬粉、金屬粉體、制藥、化工、電池、磨料以及科研教學等領域，是粉體行業振實密度測試的理想儀器。
It is suitable for non-metallic powder, metal powder, pharmaceutical, chemical, battery, abrasive and research teaching etc field , which is an ideal instrument for the tap density testing of powder industry
三、 工作原理： Working principle
將粉末量筒固定在機械振動裝置上，振動電機帶動機械振動裝置上下振動，裝有粉末的刻度量筒隨機械振動裝置而發生有節拍的振動，隨著振動次數的增加，量筒里的粉末逐漸振實，振動次數達到設定的次數后，機械振動裝置停止振動，讀出刻度試管的體積，根據密度的定義：質量除以體積、從而求出振實后的粉末密度。
Powder cylinder fixed in the mechanical vibration device, mechanical vibration device vibrate under driven by vibrating motor, the calibration test tubes which containing powder vibrate with the mechanical vibration device, with the increase of vibration frequency, the powder in the measuring cylinder gradually compact by vibration, When vibration frequency reaching setting the number of times, mechanical vibration device will stop the vibration, Read the volume of the calibration test tube, according to the definition of density: mass divided by volume, thus find out the powder density after compaction.
2. 各型號及參數描述model and parameter de ion
功能項目/型號 project/model | FZS4-4 | FT-100B | FT-100A | FT-100CA |
3. 測試工位數 Test station number | 1個 one | 2個 two |
4. 測試數據處理方式 Test data processing method | 人工計算 manual computation | 帶打印+自動計算 With print + automatic calculation |
5. 量筒配置規格 Measuring cylinder specifications | 25ml、100ml | 25ml、50ml、100ml、250ml |
6. 密度density | 0-9.9999g/cm3 |
7. 測量模式measurement | 振次和時間兩種測量方式 Vibration and time measurements |
8. 振幅 range of vibration | 最大14mm，整數1-14mm可調； Maximum 14mm, integer 1-14mm adjustable; |
9. 振動頻率 vibrational frequency | 0～300 次/分（連續可調）times/ minute. (continuous adjustable) |
10.振動時間 time of vibration | 0-9999S |
11.符合標準 meet the standards | USP（美國藥典）、BP （英國藥典）和EP（歐洲藥典）的規范；GB/T 5162-2006/ISO3953:1993（金屬粉末 振實密度的測定） USP (us pharmacopoeia), BP (British pharmacopoeia) and EP (European pharmacopoeia);GB/T 5162-2006 / ISO3953:1993 (metal powder measuring the tap density ) |
12.量筒要求 Measuring cylinder requirements | 容積Volume 100±1.0ml，刻度部分高H 175±10mm 最小刻度間的容積為1ml, volume of the minimum scale is 1ml 容積為Volume 25±0.5ml刻度部分高H 135±7mm。 最小刻度間容積為5px，測量精度為±2.5px The volume of the minimum scale is 0.2 cm and the measurement accuracy ±2.5px |
11．重復性repeatability | 誤差Deviation：≤1% |
· 12.準確性Accuracy | 誤差Deviation：≤1% |
13.適用范圍 · Scope of application | 非金屬粉、金屬粉 、制藥、化工、電池、磨料以及科研教學等粉體顆粒物料 Non-metallic powder, metal powder, pharmaceutical, chemical, battery, abrasive and scientific research teaching and other powder particle materials |
14.電源Power supply | 交流Ac 220V(50Hz/60Hz)、40W |
15.使用環境 · Operational environment | 濕度小于85%，無凝結現象，無煙塵，無機械振動源或電磁干擾源 Humidity is less than 85%, no condensation, no smoke, no mechanical vibration source or electromagnetic interference source |
16.選購項目 Buy items | a.2Q驗證文件 b.隔音箱 c.水分儀 d.粉體真密度儀 e.松裝密度儀 a.2Q verification file b. sound box c. moisture meter d. powder true density meter e. bulk density meter |
粉體圈首頁
